DO prime all concrete, masonry, metal or metallic surfaces

DO apply to clean, dry, dust free surfaces

DO remove split release film at a 45-degree angle

DO roll all seams SEALLap® and FASTLap® to ensure 100% adhesion

DO reinforce all in/out side corners

DO back nail head laps whenever roof pitch is over 2" to the foot

DO roll membrane when finished

DO keep material cool in summer

DO keep material warm in winter

DO sandwich all metal flashing components

DO NOT apply roofing membrane during inclement weather

DO NOT take ADESO™ roll out of box until ready to apply

DO NOT apply over shingles or similar roof coverings

DO NOT interfere or prevent ventilation of existing construction

DO NOT store in direct sunlight

DO NOT apply to a dirty, wet, dusty substrate

DO NOT leave out of the box overnite. Always try to use up out-of-the-box membrane that current work day

DO NOT apply in cold or wet weather or when moisture is on deck (material interface temperature should be at least 40°F (5ºC) and rising)

DO NOT apply roofing membrane during inclement weather

DO NOT forget to sandwich all metal flashing components

DO NOT forget to angle cut 45 degrees on buried laps

DO NOT forget to lap 6" on granular to granular overlaps