Polyglass USA - Company that produces modified waterproofing membranes

CAD Library - Detail Drawings

These details are generic in nature and in most cases can be used in conjunction with all Polyglass APP, SBS, SA and TPO modified Bitumen Systems.

POLYGLASS Technical Department has the capability to produce project specific details where required. For information regarding the 'POLYGLASS in house' CAD Department, please contact Technical Service on (800) 894-4563 or send an e-mail at technical@polyglass.com.

POLYGLASS does not practice architecture or engineering. These details are issued as guidelines only. POLYGLASS assumes no liability for construction or mis-use of information.

Detail drawings PG

Description	Date	Download
PG 001 Drip Edge Detail	12/03/2001	PG001.pdf
PG 002 Embedded Edge Metal Flashing (Gravel Stop)	12/03/2001	PG002.pdf
PG 003 Raised Perimeter Edge w/Metal Flashing	12/03/2001	PG003.pdf
PG 004 Raised Perimeter Edge w/Metal Flashing	12/03/2001	PG004.pdf
PG 005 Scupper Detail	12/03/2001	PG005.pdf
PG 006 Through-Wall Scupper	12/03/2001	PG006.pdf
PG 007 Gutter Detail	12/03/2001	PG007.pdf
PG 008 Gutter Detail (Alternate)	12/03/2001	PG008.pdf
PG 009 Polyglass Membrane Base Attachment	12/03/2001	PG009.pdf
PG 010 Base Flashing For Wall Supported Deck	12/03/2001	PG010.pdf
PG 011 Base Flashing For Wall Supported Deck (Alternate)	12/03/2001	PG011.pdf
PG 012 Raised Expansion Joint at Wall	12/03/2001	PG012.pdf
PG 013 Base Flashing For Non-Wall Supported Deck	12/03/2001	PG013.pdf
PG 014 Base Flashing For Vented Base Sheet	12/03/2001	PG014.pdf
PG 015 Base Flashing For Vented Base Sheet (Alternate)	12/03/2001	PG015.pdf
PG 016 Metal Parapet Cap (Coping) & Base Flashing	12/03/2001	PG016.pdf
PG 017 Metal Coping Cap with Membrane Flashing	12/03/2001	PG017.pdf
PG 018 Skylight / Roof Hatch Detail	12/03/2001	PG018.pdf
PG 019 Raised Expansion Joint / Permanent Tie-In	12/03/2001	PG019.pdf
PG 020 Expansion Joint With Premanufactured Cover	12/03/2001	PG020.pdf
PG 021 Expansion Joint With Large Metal Cover	12/03/2001	PG021.pdf
PG 022 Area Divider	12/03/2001	PG022.pdf
PG 023 Vent Pipe Flashing	12/03/2001	PG023.pdf
PG 024 Vent Pipe Flashing with Lead Sleeve	12/03/2001	PG024.pdf
PG 025 Light / Medium Weight Equipment Curb	12/03/2001	PG025.pdf
PG 026 Heavy Equipment Curb (Reference)	12/03/2001	PG026.pdf
PG 027 Typical Rain Collar / Penetration Detail	12/03/2001	PG027.pdf
PG 028 Typical Equipment Support Stand With Rain Hood	12/03/2001	PG028.pdf
PG 029 Penetration Pocket Detail	12/03/2001	PG029.pdf
PG 030 Roof Drain Detail	12/03/2001	PG030.pdf
PG 031 Roof Drain Detail (Alternate)	12/03/2001	PG031.pdf

Detail drawings PGSA

Description	Date	Download
PGSA 01 ADESO SA Edge Metal Detail	03/19/2003	PGSA01.pdf
PGSA 02 ADESO SA Gutter Detail	03/19/2003	PGSA02.pdf
PGSA 03 ADESO SA Base Flashing Detail	03/19/2003	PGSA03.pdf
PGSA 04 ADESO SA Parapet Cap Detail	03/19/2003	PGSA04.pdf
PGSA 05 ADESO SA Skylight, Scuttle & Curb, Detail	03/19/2003	PGSA05.pdf
PGSA 06 ADESO SA Vent Pipe Flashing Detail	03/19/2003	PGSA06.pdf
PGSA 07 ADESO SA Light/Medium Weight Equipment Curb Detail	03/19/2003	PGSA07.pdf
PGSA 09 ADESO Elastoflex SA & Polyflex SA Vertical Wall Detail	03/19/2003	PGSA09.pdf
PGSA 15 ADESO SA Base Flashing Parapet Wall 2-Ply Detail	03/19/2003	PGSA15.pdf
PGSA 16 ADESO SA Closed Valley Flashing Detail	03/19/2003	PGSA16.pdf
PGSA 17 ADESO SA Tie in Joint Flashing Detail	03/19/2003	PGSA17.pdf
PGSA 22 ADESO SA Outside Corner Flashing Detail	03/19/2003	PGSA22.pdf
PGSA 23 ADESO SA Inside Corner Flashing Detail	03/19/2003	PGSA23.pdf
PGSA 32 ADESO SA Roof Drain Detail (Alternate)	03/19/2003	PGSA32.pdf